Lims.science logo
Book a consultation
EN

Environmental LIMS Software

Environmental LIMS Software for Testing Labs

Purpose-built environmental LIMS for water, air, soil, and waste testing labs. Track samples from collection to reporting, configure regulatory reports and maintain chain of custody in support of applicable EPA, ISO/IEC 17025 and regional environmental requirements.

Environmental LIMS Configured Around Programmes, Matrices and Reporting Rules

The sector in practice · Environmental monitoring

Two views of your laboratory workflow

Illustrative interface · fictional data

Anonymous stack-gas measurements linked to oxygen and particulate data, using the dry-gas normalization defined in the illustrated method.

General examples shown for illustrative purposes.

Click a view to enlarge it.

Click outside to return · Escape to close

Parameters, Reports and Compliance for Environmental Labs

Common Parameters

  • pH
  • Dissolved Oxygen (DO)
  • Biological Oxygen Demand (BOD)
  • Chemical Oxygen Demand (COD)
  • Total Suspended Solids (TSS)
  • Total Dissolved Solids (TDS)
  • Turbidity
  • Conductivity
  • Ammonia (NH3)
  • Nitrate (NO3)
  • Nitrite (NO2)
  • Phosphorus (Total P)
  • Heavy Metals (Pb, Cd, Hg, As, Cr)
  • Volatile Organic Compounds (VOCs)
  • Semi-Volatile Organic Compounds (SVOCs)
  • Polycyclic Aromatic Hydrocarbons (PAHs)
  • Pesticides and Herbicides
  • Coliform Bacteria (Total & Fecal)
  • E. coli
  • Oil & Grease
  • …etc.

Lab Reports

  • Discharge Monitoring Report (DMR)
  • Drinking Water Quality Report
  • Groundwater Monitoring Report
  • Air Emissions Summary
  • Soil Contamination Assessment
  • Waste Characterisation Report
  • Permit Compliance Summary
  • Exceedance Notification Report
  • Chain of Custody Documentation
  • Field Sampling Log
  • QA/QC Summary Report
  • Trend Analysis Charts
  • Annual Environmental Compliance Report
  • Corrective Action Report
  • …etc.

Compliance Standards

  • ISO/IEC 17025
  • EPA Methods (500, 600 series)
  • Clean Water Act (CWA)
  • Safe Drinking Water Act (SDWA)
  • Resource Conservation and Recovery Act (RCRA)
  • Clean Air Act (CAA)
  • NPDES Permit Requirements
  • EU Water Framework Directive
  • EU Industrial Emissions Directive
  • WHO Drinking Water Guidelines
  • State and Regional Environmental Regulations
  • ISO 14001 Environmental Management
  • OECD GLP (where applicable to non-clinical health and environmental safety studies)
  • Chain of Custody Requirements
  • …etc.

Key LIMS Features Built for Environmental Labs

Control field sampling, custody, analytical work, QC review and authorised environmental reporting in one LIMS.

Logistics and Chain of Custody

Log water, air, soil, or waste samples by site, GPS coordinates, and sampling plans. Record chain-of-custody events from field collection through receipt, analysis, storage and final report.

Controlled Environmental Reporting

Auto-flag results that exceed permit limits. Generate discharge monitoring reports and compliance summaries on schedule.

Analytics and Metrology

Integrate ICP-MS, GC-MS, spectrophotometers, and field meters directly. Results flow into the LIMS.

Manage Quality

Document every sample handoff with timestamps, signatures, and conditions. Defensible records for regulatory review.

Consolidate Subcontractors

Send samples for specialised tests and unify all results in one report. Monitor turnaround, costs, and quality in one place.

Deliver Reports Faster

Municipalities, consultants, and industrial clients expect fast results. Generate and send branded reports from the system.

Odoo Official Partner

Environmental LIMS Based on Odoo

Lims.science is built on Odoo ERP, a widely adopted platform used by more than  15 million users globally. As a result, your environmental lab system integrates natively with accounting, inventory, purchasing, and CRM modules, without complex integrations.

  • Track lab expenses in one system
  • Track sample batches, storage, and test timelines across labs.
  • Approve results with full traceability
  • Control access at every step
  • Manage multiple sites centrally
  • Cloud or self-hosted access

Need Help?

FAQs

Yes. Workflows can be configured to support the requirements relevant to your laboratory’s ISO/IEC 17025 scope. Audit trails, method validation records, calibration logs, and document control are built in. Controlled records and traceability can make accreditation assessments more efficient.

Surface water, groundwater, drinking water, wastewater, air emissions, soil, sediment, hazardous waste, sludge and more. Each matrix has its own prep steps, parameters, and regulatory limits.

Controlled DMR and other reporting templates can be configured for the laboratory’s applicable programme and jurisdiction. Version-controlled permit limits and decision rules populate authorised data and flags for review before submission.

Absolutely. Log samples in the field with GPS coordinates, timestamps, and sampling conditions. Document every handoff with signatures and custody seals for defensible records.

Interfaces can be scoped for supported ICP-MS, GC-MS, ion-chromatography, spectrophotometer, turbidimeter and portable field-meter outputs. Transfer rules, method binding, validation checks and exceptions are defined during implementation.

We handle setup, data migration, instrument integration, and staff training. Ongoing support includes system updates, regulatory template adjustments, and technical assistance.

Stay Ahead of Environmental Compliance

Deploy a cloud-based LIMS purpose-built for water, air, soil, and waste testing. Automate reporting, meet permit deadlines, and support regulatory review.

Emissions analysis plan management

Manage approved emissions analysis plans from monitoring design through authorised report.

Supports controlled monitoring and evidence. Compliance depends on the applicable permit, jurisdiction, validated scope and laboratory procedures.

See all capabilities →
Scroll to Top